Maxxair 00-955002 Black Fanmate Cover with Ez Clip Hardware

Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.

Installation Details PDF | Alternate Installation Instructions PDF

Features

• Roof vent cover for your RV or camper enables you to open the vent and operate the fan in any weather
  • Allows air to circulate at all times, even when you're away or sleeping
  • Keeps rainwater from entering and damaging RV interior
  • Prevents heat buildup
• Designed for use with high-powered, high-speed fans
  • Including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents
• Tall cover offers more roof vent lid clearance than other MaxxAir vent covers
• Wide vent area on the back of the cover maximizes airflow
  • Less airflow restriction than standard vent covers
  • Angled louvers allow smoke, odors, and stale air to escape
• EZClip pins make it simple to open or remove the cover for roof vent maintenance - no tools needed
  • To open, pull pins out of the cover
  • To close, slide pins in and push them up to lock in place
• Durable, high-density polyethylene construction is UV resistant
  • Translucent material lets some light through
• Sleek, aerodynamic design reduces wind resistance
• Simple installation over roof vent with no need to drill into the roof of your RV or trailer
  • No drilling required for installation on MaxxFan and MaxxFan Plus roof vents
  • Mounts on frame of roof vent with included hardware
• Add-on bug screen (sold separately) keeps out insects and debris
• Black color
• Made in the USA

Specs

• Application: designed to fit over most standard 14" x 14" roof vents
  • Designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs
  • Can be used with high-powered, high-speed fans
• Overall dimensions: 25" long x 18-1/8" wide x 10-1/4" tall
• Inside dimensions: 26-1/2" long x 16-3/4" wide x 9-1/2" tall
• Vent area dimensions: 15-1/2" wide x 10-1/4" tall
• 6-Year limited warranty

Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.

Designed to work with high-powered roof vents, the FanMate cover offers superior rain protection so that the vent can be opened and the fan can be operated in any weather. The FanMate has a wide vent area that maximizes airflow, preventing heat from building up inside your RV or trailer. EZClip pins make it simple to open or remove the cover for roof vent maintenance. And no drilling is required to install the cover over a MaxxFan or MaxxFan Plus vent.

Designed for High-Powered Vents

This FanMate cover is designed to work with any roof vent that has a high-powered, high-speed fan, including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents. The FanMate is also taller than other MaxxAir vent covers so that it can provide increased lid clearance, which allows you to open the dome of your roof vent more.

The wide, louvered vent area at the back of the FanMate means that the cover provides more airflow in and out of your RV or trailer than standard covers. The angled louvers allow smoke, odors, and stale air to escape while keeping rain and debris out.

EZClips Simplify Opening

This FanMate vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.

Installation

The FanMate vent cover is specifically designed for installation on newer-model MaxxFan and MaxxFan Plus roof vents. No drilling or tools are required. The integrated mounting brackets on the FanMate perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.

If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.

If you're installing this FanMate cover over any other roof vent, then drilling into the frame of the roof vent may be required. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.

Durable Construction

This vent cover is constructed of durable, high-density polyethylene. Special additives help ensure that the material can resist the negative effects of UV rays. And the cover is translucent so that some natural light can shine through.

00-955002 Max Air Fan Mate Camper Roof Vent Rain Cover - Model 955 - Black

This item is presently on backorder.

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.