Valterra D04-0275 Dominator 20 Foot RV Sewer Hose Kit

Made for frequent RV trips, these 2 heavy-duty RV sewer hoses connect together so you can easily dump your holding tanks. 4-In-1 clear elbow adapter fits 4 sizes of sewer inlets and lets you see when your tank is empty.

Product Features

• Sewer hoses let you drain your RV's black-water and gray-water tanks at a dump station
  • Designed for long or frequent RV trips
• 2 Separate hoses allow you to adjust the length to fit your setup
  • Use standard 10' hose at most campgrounds
  • Connect 10' extension hose if extra length is needed to reach dump station
• EZ Coupler 4-in-1 elbow adapter easily connects to the dump station's sewer inlet
  • Fits 3" diameter slip and 3", 3-1/2", and 4" diameter threaded sewer inlets
  • 90-Degree elbow keeps hose from sharply bending and wearing down
  • Clear plastic lets you see when tanks are empty
• Extra-thick, 23-mil poly material is durable and won't degrade in the sun
• Swiveling fittings rotate to eliminate twisting and keep hoses laying flat
  • Internal seals help prevent leaking
• Hoses collapse for storage
  • The 10 foot hoses compress to 39 inches for storage.
• Black color

These sewer hoses come with everything you need to empty your holding tanks at a dump station, particularly one that you're parked far away from. The 2 separate hoses let you adjust the length based on your setup. Use 1 hose when you're close to the dump station or connect both together for twice the length. The heavy-duty hoses are made of 23-mil-thick poly material for extra durability. The 90-degree elbow adapter prevents the hose it's attached to from bending too sharply, and because it's clear, it lets you see when the tank is empty too. The elbow adapter also makes it easy to connect to the dump station with its 4-in-1 fit capability.

Two hoses are included - a standard 10' drain hose and a 10' extension hose - to give you up to 20' of length when connected together. A typical 20' hose can be bulky and difficult to stow in your RV. Even worse, waste can get trapped between the coils of longer hoses, causing nasty odors. With 2 hoses, you get the best of both worlds. Use the standard 10' drain hose to reach the sewer inlets at most campgrounds. Connect the included extension hose to get a full 20' of length to reach inlets that are further away. And when you're done dumping your tanks, you can separate the 2 hoses for easy storage in your RV.

The included 4-in-1 elbow makes connecting the hose to the dump station inlet fast and easy. The adapter is designed to fit 4 sizes of dump station inlets. It easily slides into 3" diameter slip inlets, and it can be screwed into a 3", 3-1/2", or 4" diameter threaded inlet.

Also, the 90-degree design ensures that there isn't a sharp bend in the hose when you connect it to the dump station inlet, which makes for a longer lasting hose. And the clear plastic construction of the elbow makes it easy to see when the water moving through your system runs clear, signaling that your tanks are empty.

To hook up the adapter, slide or screw the elbow into the dump station sewer inlet, then connect the lug fitting on the end of the hose to the bayonet fitting on the adapter. It's that easy.

The swivel fittings on each end of these hoses rotate independently. This means that, when you're screwing them onto the connection points, the entire hose will still lay flat. So when you're dumping your tanks, waste can easily flow to the sewer inlet. No twisting, no binding, no problem.

Specs

• Hose diameter: 3"
• 1-Year warranty
• Hose length (each):
  • Extended: 120"
  • Collapsed: 39"

D04-0275 Valterra Dominator Drain Hose with 3" Bayonet and Swivel Fittings for RVs - 4-in-1 Elbow Adapter - 20' Long x 3" Diameter - 23 mil Poly - Black

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.