Dexter 8-385-82UC3 Nev-R-Lube Hub and Drum Assembly for 7,000 lb Axles - 8 on 6-1/2 - 12 Inch x 2 Inch Drum
Dexter 8-385-82UC3 Nev-R-Lube Hub and Drum Assembly for 7,000 lb Axles - 8 on 6-1/2 - 12 Inch x 2 Inch Drum
Attention Customers:
The items we have listed for pop up campers are the only items we have available. We are not able to special order any items at this time, and we are unable to provide technical assistance due to high order volume.
For product availability, please text (855) 432-6357 with the vendor number and quantity you are looking for. We will answer ASAP.
This listing is for one Dexter 8-385-82UC3 Nev-R-Lube Hub and Drum Assembly for 7,000 lb Axles - 8 on 6-1/2 - 12 Inch x 2 Inch Drum
This hub-and-drum assembly fits 7,000-lb Nev-R-Lube axles with BTR spindles. Nev-R-Lube design eliminates bearing maintenance. Compatible with electric and hydraulic brakes. 50mm cartridge bearing, snap rings, grease cap, and lug nuts included.
Product Features
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Nev-R-Lube design eliminates bearing maintenance
- Roller bearing cones don't require greasing or packing
- No replacing seals when checking brakes
- Sturdy iron construction
- Bearings, snap rings, grease cap, wheel bolts, and lug nuts are included
Product Specifications
- Application: 7,000-lb trailer 50mm Nev-R-Lube axles
- Wheel size: 16" to 17-1/2"
- Drum dimensions: 12" diameter x 2" wide
- Works with 12" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Grease cap flange diameter: 3.35"
- Wheel bolt diameter: 1/2"
- Weight capacity: 3,500 lbs per hub
- Bearing, snap rings and cap included (31-71-3 bearing)
Items in Kit
- 1x 50mm Sealed Bearing (Already Installed)
- 1x 75DC Cap (3.355" OD)
- 8x X1023R Coned Wheel Nuts
- 1x 6 on 5.5" Hub & Drum
- 3,500lb Capacity Per Hub
- Use with a 12" x 2" brake
Nev-R-Lube Bearings Don't Require Maintenance
This hub-and-drum assembly uses Nev-R-Lube cartridge bearings that are designed to move slightly in accordance with your axle, minimizing the wear on your bearings. With this long-lasting hub-and-drum design, you don't need to grease bearings or replace seals. Simply install your hub-and-drum assembly and you're finished.
This order is presently on backorder
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"