MTI Industries 62 Series Marine Mini Carbon Monoxide Alarm with trim Ring- White

Features

• This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
• NMMA Listed Component.
• Works in harsh marine environments and extreme temperatures. This is the only marine CO alarm listed to operational temperatures of -40°F to 158°F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor.
• No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut off alarms available.
• Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO.
• End of Life Signal alerts boater to replace the alarm after 5 years of service.
• Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
• Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.
• Operating Specifications: Conforms To ANSI / UL STD 2034, Testing Laboratory: ETL/Intertek, Alarm Point: 400 PPM 4-15 Minutes, Low voltage power warning at 7 Volts, Power Supply and Current Draw: 37 mA at 13.8 VDC, Operational Range: 13.8 Volts +/-15%, Low voltage power warning at 7 Volts

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.