Bauer Products 013-509 RV Door Lock With Deadbolt And Programmable Keypad By AP Products
Bauer Products 013-509 RV Door Lock With Deadbolt And Programmable Keypad By AP Products
Attention Customers:
The items we have listed for pop up campers are the only items we have available. We are not able to special order any items at this time, and we are unable to provide technical assistance due to high order volume.
For product availability, please text (855) 432-6357 with the vendor number and quantity you are looking for. We will answer ASAP.
VideosThe Bauer Products 013-509 RV Door Lock With Deadbolt And Programmable Keypad By AP Products is the RV door lock the will easily integrate and retrofit the RV entrance door of your motorhome, travel trailer or camper. The touch pad with Capacitive Touch Technology operates the RV door handle and deadbolt, and is completely programmable with a 4-digit combination PIN number. The keypad conveniently lights up for use during dark hours and is powered by 4 AA batteries, so no wiring necessary during installation. The installation of this RV door lock requires an opening of 3-3/4-inch x 2-3/4-inch and a door thickness of between 1-3/8-inch and 1-1/2-inch. The color of this RV door lock and latch is black. The door latch is right handed. This lock replaces the Bargman L-300, which is a common RV door lock and fits the same size opening.
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
You May Also Be Interested In:
Article: How To Secure Your RV By CampingRoadTrip.com
Installation Instructions:
Installing The Lock:
- Remove existing lock from the RV door.
- Insert Bauer NE RV door lock housing with deadbolt in unlocked position into the RV door cut-out as shown in the diagram above.
- Attach (2) 8 x 32 flat head screws on the side of the RV door to hold the housing to the door edge.
- Plug wire from inside the plate assembly into the receptacle to connect the keypad to the battery power supply within the RV door lock.
- Align the red dots on the deadbolt knob and the inside plate of the RV door lock assembly and install the (4) 8 x 32 oval head screws to securely mount the RV door lock.
- Please see the video below for a step by step demonstration of the installation process for your new RV door lock with deadbolt.
Installing The Batteries:
- Carefully remove the (2) 4 x 40 screws to open the battery compartment lid of the RV door lock.
- Install 4 fresh AA batteries according to the orientation symbols labeled in the bottom of the battery compartment of the RV door lock.
- Install the battery compartment lid by aligning the (3) tabs and (3) slots on the lid and RV door lock.
- Carefully install the (2) 4 x 40 screws to secure the battery compartment lid onto the RV door lock.
