14 Inch x 14 Inch Crank Out Trailer Roof Vent with White Top, Screen

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank. It also has a removable screen and a replaceable polypropylene cover.

Features

• Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure
• Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring
• Translucent cover allows some light through
• Aerodynamic, wedge-shaped dome made of durable polypropylene
• Galvanized steel roof flange won't rust or corrode
• Snap-out screen is easy to clean
• Polar White interior trim piece (or garnish) is included
• Made in the USA
• Screw-in or clamp-in option.
  

Specs

• Included garnish fits roofs 1-7/8" to 3" thick
  • Garnish leg length (depth): 2-1/8"
  • Garnish color: Polar White
  • Other garnish sizes are available (sold separately)
• Cover color: white
• Rough opening size: 14-1/4" wide x 14-1/4" long
• Vent extends above roof:
  • 4-1/2" Closed
  • 10-3/4" Open
• 2-Year limited warranty

Installation Instructions

1. Mark desired location for vent. Be sure to choose a location between roof joists.
2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
5. Mount to roof with #8 screws.
6. Attach interior garnish piece with #8 screws.

V2092SP-28 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.