Dexter 84550BX Boxed Hub Assembly - 5 on 5 - L68149/L44649 - For 3500 Lbs Axles - Fits #84 Spindle
Dexter 84550BX Boxed Hub Assembly - 5 on 5 - L68149/L44649 - For 3500 Lbs Axles - Fits #84 Spindle
Attention Customers:
The items we have listed for pop up campers are the only items we have available. We are not able to special order any items at this time, and we are unable to provide technical assistance due to high order volume.
For product availability, please text (855) 432-6357 with the vendor number and quantity you are looking for. We will answer ASAP.
Dexter 84550BX Boxed Hub Assembly - 5 on 5 - L68149/L44649 - For 3500 Lbs Axles - Fits #84 Spindle
This Dexter Boxed Trailer Hub Assembly includes lug nuts, inner bearing (L68149) and race, outer bearing (L44649) and race, grease cap and grease seal. Fits 3,500-lb axles.
Product Features
- Application: most 3,500-lb axles, including Dexter
- Trailer hub assembly fits idler axles
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Sturdy iron construction
- Pre-greased idler hub is easy to install - no need to pack bearings
- Hub and drum are made in the USA
Product Specifications
- Application: 3,500-lb trailer axles with #84 spindles
- Wheel size: 13" to 15"
- Bolt pattern: 5 on 5"
- Grease cap flange diameter: 1.986"
- Wheel bolt diameter: 1/2"
- Weight capacity: 1,750 lbs
- Pilot diameter: 2.58"
- Capacity: 1,750 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Redline Trailer Hubs and Drums - 84550BX
- 5 on 5 Inch
- For 3500 lbs Axles
- Hub
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Pre-Greased
- Standard
- L44649
- L68149
- Redline
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
